| 1,332 | 96 | 151 |
| 下载次数 | 被引频次 | 阅读次数 |
微细电火花加工(Micro Electrical Discharge Machining,Micro EDM)作为微细加工技术的一种,可以在任何导电材料上加工高精度、大深宽比微细三维型腔,以满足日益增长的产品微小型化需求。针对微细电火花加工中的一些关键问题,如微细电极损耗与补偿、大深径比微孔加工,本文着重介绍部分研究结果,以期在微细电火花加工技术的应用中,提供解决对策。
Abstract：Micro electrical discharge machining (Micro EDM),as one of micromachining methods,can be used to generate micro features with high precision and high aspect ratio in any electrically conductive materials to meet the increasingly requirement of product minimization.This paper presents some research results of Micro EDM, attempting to provide some solutions to existing problems in Micro EDM such as tool wear,machining of micro hole with high aspect ratio and expecting their potential application in future.
[1]Masuzawa T.Micro-EDM [A].Proceedings of ISEMⅩⅢ[C]. 2001:3～19.
[2]Ehrfeld W,Lehr H,Michel F,et al.Micro Electro Discharge Machining as a Technology in Micromachining [A].Proceedings of SPIE [C].1996,2879:332～337.
[3]Masuzawa T,Fijino M,Kobayashi K.Wire Electrodischarge Grinding for Micromachining [J].Annals of the CIRP,1985, 34(1):431～434.
[4]Masuzawa T.State of the Art of Micromachining [J].Annals of the CIRP,2000,49(2):473～488.
[5]Yu Z Y,Masuzawa T,Fujino M.3D Micro-EDM with Simple Shaped Electrode,Part 1:Machining of cavities with sharp corners and electrode wear compensation [J].International Journal of Electrical Machining,1998,(3):7～12.
[6]Yu Z Y,Masuzawa T,Fujino M.Micro-EDM for Three Dimensional Cavities,—Development of Uniform Wear Method—[J].Annals of the CIRP,1998,47(1):169～172.
[7]Rajurkar K P,Yu Z Y.3D Micro-EDM Using CAD/CAM [J]. Annals of the CIRP,2000,49(1):127～130.
[8]Yu Z,Rajurkar K P.Generation of Complex Micro Cavities by Micro EDM [J].Transactions of North America Manufacturing Research Institute of SME,2000,233～238.
[9]Yu Z,Rajurkar K P,Shen H.Drilling of Noncircular Blind Micro Holes by Micro EDM [J].Transactions of North America Manufacturing Research Institute of SME,2002, 263～270.
[10]Masuzawa T,Tsukamoto J,Fujino M.Drilling of Deep Microholes by EDM [J].Annals of the CIRP,1989,38(1): 195～198.
[11]Yu Z.,Rajurkar K P,Shen H.High Aspect Ratio and Complex Shaped Blind Micro Holes by Micro EDM [J].Annals of the CIRP,2002,51(1):359～362.
基本信息:
中图分类号:TG661
引用信息:
[1]余祖元,郭东明,贾振元.微细电火花加工技术[J].中国科技论文在线,2007(03):214-220.
基金信息:
大连理工大学提供科研启动资金
2007-03-15
2007-03-15