HRB400钢筋高温冷却后力学性能试验研究The mechanical properties of HRB400 steel exposed to cooling after the high temperature
张茂林;杜红秀;陈良豪;陈尧;贺一轩;
摘要(Abstract):
为了解不同受火温度后不同冷却方式下钢筋物理力学性能的变化,试验测试了HRB400钢筋在不同受火温度及喷水、自然和炉内3种冷却方式冷却后钢筋的屈服强度、抗拉强度、断后伸长率、断面收缩率等参数的变化情况,并采用无损红外热像检测技术对高温后不同冷却方式的钢筋进行了红外图谱分析。结果表明:高温后钢筋的力学性能变化规律与钢筋的受火温度和冷却方式有关,其中炉内冷却和自然冷却的力学性能变化规律相近,而喷水冷却变动较为剧烈;随着钢筋受火温度的升高,红外平均温升提高,受火温度低于700℃时,冷却方式对受火钢筋的红外平均温升影响不大,受火温度高于700℃时,喷水冷却对红外平均温升影响较大;基于试验数据建立了钢筋红外平均温升与受火温度、屈服强度比和抗拉强度比关系的拟合公式,可用于火灾后HRB400钢筋的承载能力的评估。
关键词(KeyWords): HRB400钢筋;高温冷却;力学性能;红外热像
基金项目(Foundation): 国家自然科学基金资助项目(51278325)
作者(Author): 张茂林;杜红秀;陈良豪;陈尧;贺一轩;
Email:
DOI:
参考文献(References):
- [1]杜红秀,张雄,韩继红.混凝土构筑物的火灾危害与损伤检测评估[J].建筑材料学报,1998,1(2):71-77.DU Hongxiu,ZHANG Xiong,HAN Jihong.Testing and evaluation on the fire harms and damages of concrete structure[J].Journal of Building Materials,1998,1(2):71-77.(in Chinese)
- [2]陈薇,杜红秀.高温对C80高性能混凝土热膨胀性能及其微结构的影响[J].中国科技论文,2017,12(13):1477-1481.CHEN Wei,DU Hongxiu.Effect of high temperature on thermal expansion and microstructure of C80high performance concrete[J].China Sciencepaper,2017,12(13):1477-1481.(in Chinese)
- [3]王孔藩,许清风,刘挺林.高温下及高温冷却后钢筋力学性能的试验研究[J].施工技术,2005,34(8):3-5.WANG Kongfan,XU Qingfeng,LIU Tinglin.Experimental research on mechanics performance of steel bar after high temperature and cooled down from high temperature[J].Construction Technology,2005,34(8):3-5.(in Chinese)
- [4]KODUR V,DWAIKAT M.High-temperature properties of steel for fire resistance modeling of structures[J].Journal of Materials in Civil Engineering,2010,22(5):423-434.
- [5]OUTINEN J,MAKELAINEN P.Mechanical properties of structural steel at elevated temperatures and after cooling down[J].Fire and Materials,2004,28(2/3/4):237-251.
- [6]QIANG Xuhong,BIJAARD F S K,KOLSTEIN H.Post-fire mechanical properties of high strength structural steels S460and S690[J].Engineering Structures,2012,35:1-10.
- [7]QIANG Xuhong,BIJAARD F S K,KOLSTEIN H.Post-fire performance of very high strength steel S960[J].Journal of Constructional Steel Research,2012,80:235-242.
- [8]陈建锋,曹平周.高温后结构钢力学性能试验[J].解放军理工大学学报(自然科学版),2010,11(3):328-333.CHEN Jianfeng,CAO Pingzhou.Experimental investigation into mechanical properties of steel post high temperatures[J].Journal of PLA University of Science and Technology(Natural Science Edition),2010,11(3):328-333.(in Chinese)
- [9]张有桔,朱跃,赵升,等.高温后不同冷却条件下钢材力学性能试验研究[J].结构工程师,2009(5):104-109.ZHANG Youjie,ZHU Yue,ZHAO Sheng,et al.Experimental research on mechanical properties of steel cooled in different modes after high temperature treatment[J].Structural Engineers,2009(5):104-109.(in Chinese)
- [10]WANG Weiyong,LIU Tianzi,LIU Jiepeng.Experimental study on post-fire mechanical properties of high strength Q460steel[J].Journal of Constructional Steel Research,2015,114:100-109.
- [11]CHEN Zhihua,LU Jie,LIU Hongbo,et al.Experimental study on the post-fire mechanical properties of high strength steel tie rods[J].Journal of Constructional Steel Research,2016,121:311-329.
- [12]余志武,王中强,史召锋.高温后新Ⅲ级钢筋力学性能的试验研究[J].建筑结构学报,2005,26(2):112-116.YU Zhiwu,WANG Zhongqiang,SHI Zhaofeng.Experimental research on material properties of newⅢgrade steel bars after fire[J].Journal of Building Structures,2005,26(2):112-116.(in Chinese)
- [13]张飞鹏,罗从双,赵世贤.冷拔30MnSi盘条退火后的组织与性能[J].热加工工艺,2014,43(18):211-214.ZHANG Feipeng,LUO Congshuang,ZHAO Shixian.Microstructure and properties of cold-drawing 30MnSi steel after annealing[J].Hot Working Technology,2014,43(18):211-214.(in Chinese)
- [14]张飞鹏,杨欢,赵世贤,等.淬火工艺对30MnSi钢筋显微组织的影响[J].金属热处理,2014,39(4):106-109.ZHANG Feipeng,YANG Huan,ZHAO Shixian,et al.Effect of quenching process on microstructure of30MnSi steel bar[J].Heat Treatment of Metals,2014,39(4):106-109.(in Chinese)
- [15]张婧.600MPa级高强钢筋用钢成分与控冷工艺的研究[D].北京:北京科技大学,2016.ZHANG Jing.Research on composition and controlled cooling process of 600 MPa grade high strength rebar steel[D].Beijing:University of Science and Technology Beijing,2016.(in Chinese)